Charnwood SLX 20fs

The Charnwood SLX 20 is a multi-fuel stove with a more contemporary feel and sophisticated operation. It simplifies the real fire process: burning less fuel, more cleanly with maximum efficiency and low emissions. It is available in a number of sizes to suit your specific heating needs: from a pure room heater through to full central heating.

The SLX 20 has been carefully designed to get the very best out of the fuel that is burnt. This can be wood, coal, smokeless fuel, briquettes or even peat. All these fuels can be burnt at optimum efficiency. On the well proven Charnwood multi-fuel grate.

The SLX 20 is purely for room heating delivering up to 5.4 kW of heat. It is fully controllable with a built in thermostat to regulate the heat output to the room. Both the inset and freestanding models come with the option of a small add-in-boiler to heat the domestic hot water.

Charnwood Boilers

Charnwoods range of boiler stoves are designed specifically for those wishing to run a full central heating system. The benefits of a ‘real fired’ central heating system as opposed to gas, electric or oil are numerous: the constant heat source, elimination of condensation and the continual air changes caused by a ‘breathing’ heating appliance, are far more beneficial to health and well-being than its counterparts. The high efficiency of these Charnwood boilers also offers significant environmental benefits; producing less Co2 emissions than an equivalent gas or oil boiler.

As with all our wood and multi-fuel burning models we incorporate an airwash system which will ensure superb clean-burning and a clear view of the fire at all times regardless of what fuels are burnt. The IIIb, 16b and SLX stoves also feature Charnwood’s unrivalled riddling grate as standard to allow easy removal of ash. The grate can also be opened slightly to increase burning rate when required


Nominal Heat Output: 4 hour reloading 5.4kW to room (18,500 BTU/hr) To optional boiler 2.3kW (8,000 BTU/hr) Room Capacity Approximately 108m3 – 6.3 x 6.3 (20 x 20ft) Flue Outlet: Top or rear 6” (150mm) diameter Maximum log length: 11” (280mm) Weight: 130kg Thermostat: Body temperature sensing Optional Charnwood SLX 20i available



Sold Out